2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

i got my lowend back YAY! pic's inside

Old Mar 17, 2010 | 08:53 PM
  #1  
yakkier's Avatar
yakkier
Thread Starter
|
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
Default i got my lowend back YAY! pic's inside

It's amazing what a trans flush and filter will do. Iv got my lowend back now so my next project is going to be the plenum.

Heres the pic's

Old filter was caped with all kinds of crap.



Fluid wasnt as bad as i would have expected.



A lil bit of metal shavings in the bottom of the pan, kinda worrys me a little bit and the magnet was COVERED in crud.





Pan all cleaned up and new gasket installed, originally it had a cork gasket which was a royal pain in the *** to get off, took me 30 min to take it off with a scraper.



New filter installed.






Tool's and parts needed

1/2 socket - Free on hand

One trans filter and gasket kit - $7.99

One gallon of ATF-4 trans fluid - $11.99

total with taxes was around $20.99

Time invested roughly an hour.


Regaining my lowend torque, Priceless!
 

Last edited by yakkier; Mar 17, 2010 at 08:57 PM.
Reply
Old Mar 17, 2010 | 09:05 PM
  #2  
meanwhitemopar's Avatar
meanwhitemopar
Record Breaker
Joined: Aug 2008
Posts: 1,354
Likes: 1
From: stationed in nc
Default

good to see its got power again, just imagine once you get the plenum changed too...
 
Reply
Old Mar 17, 2010 | 09:07 PM
  #3  
DukesOfHazzard's Avatar
DukesOfHazzard
Record Breaker
Joined: Feb 2010
Posts: 1,034
Likes: 0
Default

Ya know i've done mine a few times and you'd think i be smart enough to put a drain plug in by now>>
 
Reply
Old Mar 17, 2010 | 09:08 PM
  #4  
mastergrader007's Avatar
mastergrader007
Registered User
Joined: Feb 2010
Posts: 30
Likes: 0
From: ontario, canada eh
Default

good to hear. I would like to know where the hell you guys get your parts from??? My filter and gasket kit was 30bucks! and my atf+4 was 30 bucks for 5 ltrs.
 
Reply
Old Mar 17, 2010 | 09:10 PM
  #5  
yakkier's Avatar
yakkier
Thread Starter
|
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
Default

autozone
 
Reply
Old Mar 17, 2010 | 09:13 PM
  #6  
PurplDodge's Avatar
PurplDodge
Legend
Joined: Jan 2008
Posts: 8,321
Likes: 12
From: Indiana
Default

Yak that fluid looks plenty dirty. Glad you got it changed!

Those metal shavings on the magnet are nothing to worry about. That is what the magnet is there in there for in the first place

Originally Posted by mastergrader007
good to hear. I would like to know where the hell you guys get your parts from??? My filter and gasket kit was 30bucks! and my atf+4 was 30 bucks for 5 ltrs.
I got my WIX 58613 filter from O'Reillys for $15. Plus another $5 for my external filter, and $20 for 5 quarts of Coastal ATF+4 ($4/qt).
 
Reply
Old Mar 17, 2010 | 09:16 PM
  #7  
dodge15004x45.9's Avatar
dodge15004x45.9
Legend
Joined: Nov 2008
Posts: 7,950
Likes: 2
From: Malvern Pa - Canadensis Pa
Default

I got a deep pan for mine shipped 2 day (cause i needed it fast) for 285 with drain plug and fins.
 
Reply
Old Mar 17, 2010 | 09:20 PM
  #8  
yakkier's Avatar
yakkier
Thread Starter
|
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
Default

yea i was thinkin about ordering a deeper pan, but my skid plate might be an issue and i dont wanna remove it.
 
Reply
Old Mar 17, 2010 | 09:26 PM
  #9  
95RAM360's Avatar
95RAM360
Grand Champion
Joined: Aug 2009
Posts: 5,971
Likes: 45
From: MAINE
Default

Originally Posted by yakkier
autozone

Thats whre i work now so it will be cheaper for me lol...


good to hear that it regained power...i was going to do mine this weekend...
 
Reply
Old Mar 17, 2010 | 10:23 PM
  #10  
yakkier's Avatar
yakkier
Thread Starter
|
Banned
Joined: May 2006
Posts: 3,667
Likes: 1
From: Burnsville, mn - Pensacola, fl
Default

Awesome man! you didnt tell me you got the job, i knew you applied but didnt know they called you back.

I also applied today for a part time at the autozone i always goto, the manager tracy said they are hiring like crazy because they cant keep help around and they are extremely under staffed. I would like to work there for the discount and also because it's only 2 blocks away from my house lol
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:32 PM.