I sit stock height with 285's. I am interested in seeing what your guy's rigs look like with 3" body lifts. Anyone have just a body lift on their truck? I want to see how much gap there is between the bed and frame and how much is seen through the wheel well. Also, I am hoping that my nerf bars will be used more if they are 3" lower than they are now from the body.

 

Our trucks have wheel well liners (unless you took yours out) from the factory, so you can't see any gap between the frame and body. Our trucks hide a bodylift very well. YOu can look at the pics in my gallery. I have a 3" suspension lift too, but you get the idea anyway about how unnoticable the body lift looks.

 

+1 on that. i have a 6" suspension and a 3" body and you wouldnt never know the body was lifted other than i dnt have the back bumper brought up with the body bc then my hitch hangs low and looks rediculous, so i made my own gap gaurd to go inbetween the tailgate and bumper

why not just go with a suspensio lift?

 

Cost is usually a big factor, and if you just want the look or mabey just to run a bigger tire.

 

yeah but you can do spacers on front coils and either blocks or AAL in the rear for the same price

 

But that's no better for off roading then a BL would be.

 

but its 100% easier install, and a body lift isnt gonna help for offraoding at all what-so-ever

 

idk im not argueing about it im just saying its the same price and easier to install

 

So why didnt you nut up and do that to your old truck that we all like much better, (WHOOPS DID I JUST SAY THAT OUTLOUD?) IT'S ALL GOOD JUST PLAYIN

 

ummm i had a 4 inch lift on that truck bud........ i had coils from an 05 cummins 3500 (4inches up front) and i had 6" blocks in the rear instead of the 3inch stock ones