2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

46re brand new, wont shift into the next gear

Thread Tools
 
Search this Thread
 
  #21  
Old 04-09-2010 | 07:45 PM
J415's Avatar
J415
Champion
Joined: Feb 2009
Posts: 3,416
Likes: 3
From: Bay Area, CA
Default

like I said, clean it, put it back. THEN if it still doesn't work, replace it.
 
  #22  
Old 04-09-2010 | 08:24 PM
foxracing584's Avatar
foxracing584
Thread Starter
|
Amateur
Joined: Mar 2010
Posts: 33
Likes: 0
From: Odessa, FL
Default

sorry i miss read. imma clean it softly with brake cleaner and toothbrush and put a new filter in and see if that helps if not... i'll replace
 
  #23  
Old 04-09-2010 | 09:08 PM
J415's Avatar
J415
Champion
Joined: Feb 2009
Posts: 3,416
Likes: 3
From: Bay Area, CA
Default

No worries. I hope that works out for you.
 
  #24  
Old 04-09-2010 | 11:28 PM
MonteC's Avatar
MonteC
Record Breaker
Joined: Nov 2003
Posts: 1,256
Likes: 2
From: North Charleston, SC
Default

Those arent new.... I hope you got that trans dirt cheap.
 
  #25  
Old 04-09-2010 | 11:52 PM
foxracing584's Avatar
foxracing584
Thread Starter
|
Amateur
Joined: Mar 2010
Posts: 33
Likes: 0
From: Odessa, FL
Default

Originally Posted by MonteC
Those arent new.... I hope you got that trans dirt cheap.
your sh*tting me right? how can you tell? im going to have one hell of a talk with the guy i bought the transmission from then
 
  #26  
Old 04-09-2010 | 11:58 PM
MonteC's Avatar
MonteC
Record Breaker
Joined: Nov 2003
Posts: 1,256
Likes: 2
From: North Charleston, SC
Default

You dont get that kind of build up after only 100 miles of driving. Either they screwed something up on the build, or those are used solenoids.
 
  #27  
Old 04-26-2010 | 09:06 PM
foxracing584's Avatar
foxracing584
Thread Starter
|
Amateur
Joined: Mar 2010
Posts: 33
Likes: 0
From: Odessa, FL
Default

sorry it took so long to get back to this... but except for cleaning the sensor and soleniod, i went through my dad's friend and was able to get both sensor and soleniod for $110.

picked a new filter and gasket

and some more fuild because i might as well change it while im in there.


and all back together no problem... and imagine this, it shifts... like it never shifted before
 
  #28  
Old 04-26-2010 | 09:14 PM
foxracing584's Avatar
foxracing584
Thread Starter
|
Amateur
Joined: Mar 2010
Posts: 33
Likes: 0
From: Odessa, FL
Default

oh ANNNNDDDDD, about a week after i changed everything.. i was driving and the over drive turned off and about 10 seconds later the trans temp light came on.... turned down a side road let it sit for about 2 hours, drove it back home.... jumped on dodgeforum and used the SEARCH FEATURE like not a lot of people like using ... and turned out the trans check valve was stuck, so with some brass fittings.... no more check valve and has had no more problems since...

used a temperture gun and pointed it all the trans pan after driving it for at 30 minutes none stop and read 154* F. this is at 72*f outside. sound good for a good temperture? or should i throw a external b&m cooler on it anyways?
 

Last edited by foxracing584; 04-26-2010 at 09:29 PM.
  #29  
Old 04-26-2010 | 09:48 PM
J415's Avatar
J415
Champion
Joined: Feb 2009
Posts: 3,416
Likes: 3
From: Bay Area, CA
Default

Originally Posted by foxracing584
... jumped on dodgeforum and used the SEARCH FEATURE like not a lot of people like using... and turned out the trans check valve was stuck...
Glad everything worked out for you...And THANK YOU for using the search feature. Most people would just start a new thread. My hat off to you for that!
 
  #30  
Old 04-26-2010 | 10:16 PM
95RAM360's Avatar
95RAM360
Grand Champion
Joined: Aug 2009
Posts: 5,971
Likes: 45
From: MAINE
Default

temp should be in the 120's i thought
 


Quick Reply: 46re brand new, wont shift into the next gear



All times are GMT -4. The time now is 11:34 AM.