Ring and pinion's and lockers
#1
Ring and pinion's and lockers
I've been looking around but the cheapest ring and pinion that i have found was $250. does anybody know of another place? yes i've googled and i could list the places that i have been but that would take more time then what its worth. also a locker that isn't ARB i'm not running an air line.
#2
#3
#4
#5
#7
Trending Topics
#8
you may be referring to reverse cut gears for a high pinion setup thats used in hard core offroad axles. we don't have those. we have standard low pinion dana 44's that use standard cut gears.
check the web sites for the description of carrier vs. gear range. i'm not sure but something like 3.55, 3.92, 4.10 use one carrier and 4.56/4.88 use another. i could be wrong about where the 4.10 falls, so don't rely on me.
check the web sites for the description of carrier vs. gear range. i'm not sure but something like 3.55, 3.92, 4.10 use one carrier and 4.56/4.88 use another. i could be wrong about where the 4.10 falls, so don't rely on me.
#9
#10
you may be referring to reverse cut gears for a high pinion setup thats used in hard core offroad axles. we don't have those. we have standard low pinion dana 44's that use standard cut gears.
check the web sites for the description of carrier vs. gear range. i'm not sure but something like 3.55, 3.92, 4.10 use one carrier and 4.56/4.88 use another. i could be wrong about where the 4.10 falls, so don't rely on me.
check the web sites for the description of carrier vs. gear range. i'm not sure but something like 3.55, 3.92, 4.10 use one carrier and 4.56/4.88 use another. i could be wrong about where the 4.10 falls, so don't rely on me.