When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I tried the search, looked in my haynes, chilton, and my DF Xmas gift (FSM) and could not find all the parts and things I need to do my front brakes. Any help and links are appreciated.
pads, c-clamp to compress calipers, hex or socket to remove ? can't remember. slide lube, anti squeak goop, brake cleaner. maybe a little fluid to top off or bleed. if rotors are all scarred up, then you'll need to turn or replace rotors.
you're 2wd right, so do you have the simple slip on rotors, or do you have rotors with hubs. if with hubs, then at a minimum - repack the tapered bearings, maybe replace them, maybe replace rotors and you'd need the seal on the back side. if you have a seal puller, you can pull/reuse the seal. if you bash it out screwdriver, you'll likely need new seals.
zip ties or rope to hold the caliper out of the way, if you abs and your repacking bearings or taking the rotors off you don't want that caliper hangin.