has anybody had poblems with the BW parts company i am starting to wonder if i have already replaced the broken part but got a bad new part in the process

 

yes the fuel pump does come on when i am cranking it i am starting to wonder if i have already changed the part but got a bad one because besides the pcm what else can it be i have changed the tps coil cap rotor wires crank and cam sensor am i missing somthing

 

i have power at all the sensors and coil if i turn the key on i have power then it stops then turn the key off and on again samething thing but no spark i am going to chnage the crank sensor out agin this weekend to see if i got a bad one so we shall see what happens

 

Might wanna get one from the dealer, yeah, they are more expensive, but, they actually WORK......

 

It is really important to verify 5v on the feed to all the sensors. If there is a sensor shorted, which includes the trans sensors, it will do just that...........nothing...

If the voltage is down,unplug one sensor at a time while metering from one location until the voltage goes back to 5v, and that sensor will be your problem.

 

alright just got a v meter and am gonna check that stuff so you are saying with the key on unplug a sensor and put the meter on it then onw at a time unplug and plug back in the other sensors until i see the v moved which test on the meter do i turn the **** to and which tab in side the plug do i touch the meter to thanks very much

 

i just did that test and i have 2v when i check all the sensors from the tps and checkd each sensor plug and have 2v at all ecept for the coil plug i have no v to it any ideas thanks

 

How's your battery?

 

its low i have to jump the truck to crank it over

 

but when we do jump it it turns fast for a minute then dies off again