5.2/5.9 Swap
#1
#3
I swapped mine out and was told I needed a new torq converter for the 5.9 from a tranny man but I didnt. A year and a half later when I had my tranny rev failure I swapped it out then.
Diffently flexplate swap other then that I dont think I did anything else.
I have wondered everysince if the pcm needed to be changed"control module"
I guess I'll use the SEARCH button as the NICE gentlemen mentioned above to answer that ?.
Diffently flexplate swap other then that I dont think I did anything else.
I have wondered everysince if the pcm needed to be changed"control module"
I guess I'll use the SEARCH button as the NICE gentlemen mentioned above to answer that ?.
#6
that is not true at all. the 318 and 360 are one in the same. the 360 may be a little bigger, but all the connections are the same. all he would have to do is get the correct torque converter and the correct pcm and it will bolt right in.
#7
Trending Topics
#8
#9
Hurry up! Because it's going to the JY soon, before winter. I need that POS out of my driveway before the friggin snow.
#10
unemployment has hit me hard. cant even get unemployment. this state really sucks. im trying to get some stuff sold still. do you have a date set of when its going to the JY?