33" tires and gears
#11
I don't want to have it shift in and out of overdrive on the highway when going up an incline. After I do the lift I want to see how bad my tires look on it and then decide if I need or want to go bigger. I am thinking they are going to look too small for that lift. I can't find any good information on what is exactly needed to do the gear change on our trucks. I found some posts of people doing the change but none with enough information to answer my questions on what all needs to be purchased.
#12
#13
You can follow this link and you will see what you need for parts and how much. Basically you need master install kits for the front and back,R&P, maybe a front Carrier
Dana 44 Carrier Breaks: 3.73-lower, 3.92-higher
91/4 Carrier breaks: None
http://www.iwerearendsonly.com/index.php
Dana 44 Carrier Breaks: 3.73-lower, 3.92-higher
91/4 Carrier breaks: None
http://www.iwerearendsonly.com/index.php
#14
#15
When I bought the truck it had them, with a coil spacer lift. I took the lift off, sold the tires and threw on some normal sized tires. I'm not playing with the truck, no need for all terrains. They were ****ty BFG's anyways.
#16
You can follow this link and you will see what you need for parts and how much. Basically you need master install kits for the front and back,R&P, maybe a front Carrier
Dana 44 Carrier Breaks: 3.73-lower, 3.92-higher
91/4 Carrier breaks: None
http://www.iwerearendsonly.com/index.php
Dana 44 Carrier Breaks: 3.73-lower, 3.92-higher
91/4 Carrier breaks: None
http://www.iwerearendsonly.com/index.php
#18
#20
Ok as for what the Carrier breaks means you need a different carrier for the different ratios for that diff
so for the
dana 44
Carrier Breaks: for gears 2.72, 3.07, 3.31, 3.54, 3.73,=lower (all fit this carrier)
for gears 3.91, 4.09, 4.27, 4.56, 4.88, 5.13=higher (all fit this carrier)
For the dodge 91/4 all gear ratios fit the same carrier
Dodge/Chrysler 9.25 Rear Bearing Kit Bearing Kits New $175.00 $17.99
Dodge/Chrysler 9.25 Rear Bearing Kit. This kit includes OEM Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete master shim kit, ring gear bolts, pinion nut, crush sleave, thread locking compound,
so for the
dana 44
Carrier Breaks: for gears 2.72, 3.07, 3.31, 3.54, 3.73,=lower (all fit this carrier)
for gears 3.91, 4.09, 4.27, 4.56, 4.88, 5.13=higher (all fit this carrier)
For the dodge 91/4 all gear ratios fit the same carrier
Dodge/Chrysler 9.25 Rear Bearing Kit Bearing Kits New $175.00 $17.99
Dodge/Chrysler 9.25 Rear Bearing Kit. This kit includes OEM Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete master shim kit, ring gear bolts, pinion nut, crush sleave, thread locking compound,
Last edited by merc225hp; 10-11-2010 at 01:18 PM.