Well i plan on doing the Hughes plenum but figured when i get to that i should just do head gaskets while i'm in there so it would be one less thing to worry about...

So anybody kno of a good/better brand head gasket and where to order??
thanks

P.S. i was thinking about a new ring set too but i will worry about if need be..

 

IMO that's going a bit far. I personally wouldn't want to tackle that unless absolutely necessary. I always use fel-pro gaskets.

 

true but i will be half way there doing the plenum

 

True lol. Go ahead and put some new heads on it. A set of 2.02 iron rams would be sweet.

 

ha ha funny thing i was actually just looking at new heads but im gonna pass

 

I'd at least take yours in and have them checked out though.

 

and find out they are cracked.......

You can get better than stock replacement heads for around 270 each from clearwater cylinder head in florida, or EQ as well. (also in florida as I recall.)

 

so pretty much you guys think i should upgrade my heads.... well maybe i will put plenum off for a little while..

thanks for the info

 

If interested I have a set of gaskets. Brand new still in the wrappers. I bought them then had to have the cylinders bored. Posted them on here a while back but nobody bought them. I have no use for them, I'll give ya a deal on them