DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Gasket Cement

Thread Tools
 
Search this Thread
 
  #11  
Old 05-03-2011 | 07:04 PM
jpsycoboy5's Avatar
jpsycoboy5
Thread Starter
|
Professional
Joined: Apr 2010
Posts: 243
Likes: 0
Default
Originally Posted by tweeker909
FELPRO Part # : MS95392 is the cork set used up to 97.......Part # : MS95392-1 is the updated rubber/metal core end seals used on 98-up. MS95292-1 can be used on 97-older. Little ULTRA BLACK RTV in all four corners.
Thanks for the help i'll go out and get that and hopefully have the truck all back together by morning
 
Reply Like
  #12  
Old 05-03-2011 | 07:11 PM
tweeker909's Avatar
tweeker909
Professional
Joined: Jan 2011
Posts: 200
Likes: 0
Default
Originally Posted by jpsycoboy5
Thanks for the help i'll go out and get that and hopefully have the truck all back together by morning
YW......Going to need some install pic's n such. KEGGER MOD why you have it apart?
 
Reply Like
  #13  
Old 05-03-2011 | 07:17 PM
jpsycoboy5's Avatar
jpsycoboy5
Thread Starter
|
Professional
Joined: Apr 2010
Posts: 243
Likes: 0
Default
Originally Posted by tweeker909
YW......Going to need some install pic's n such. KEGGER MOD why you have it apart?
I had the original engine apart because the #8 cyl had 40 psi of compression the piston ring had snapped and put a deep gouge in the cylinder. I got another 318 and have since been swaping motors, plenum, kegger mod, etc. I hoped that it was just the heads on the old motor but it wasn't.
 
Reply Like
Back to Subforum
2nd Gen Ram Tech
View Next Unread
Recirculate setting? wtf




Advanced Search
Quick Reply: Gasket Cement


Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 08:17 PM.