2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Code 0443 in odometer

Thread Tools
 
Search this Thread
 
Old May 30, 2011 | 04:39 PM
  #1  
GmDude66's Avatar
GmDude66
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 23
Likes: 0
From: PA
Default Code 0443 in odometer

Hello, today I noticed my check engine light was on in my 2000 Ram 1500. I took it to autozone and their tester did not report any codes. I did the 3x key cycle and I got a code of P 0443 on the odometer.

The only thing I did to the truck was refill it with r134a t get the AC to be cold. The AC wasn't cold since I got the truck over a year ago. (it was so empty the compressor wouldn't even turn on)

Anyone have any ideas?
 

Last edited by GmDude66; May 30, 2011 at 05:05 PM.
Reply
Old May 30, 2011 | 05:08 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,404
Likes: 4,214
From: Clayton MI
Default

P0443 Evap Purge Solenoid Circ

I think your solenoid is on the passenger side wheel well toward the front..... not sure if this would be an electrical problem, or, possibly a vacuum leak.
 
Reply
Old May 30, 2011 | 07:24 PM
  #3  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default

the purge solenoid is on the passenger side fender well, in the same area as the AC lines and charging port. its got about 4 or 5 vac lines attached. see if you bumped it in the wrong way, check the vac lines, check the electrical plug. maybe unplug and replug it.
 
Reply
Old May 31, 2011 | 10:53 AM
  #4  
GmDude66's Avatar
GmDude66
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 23
Likes: 0
From: PA
Default

Checked the lines for leaks and also unplugged and reinserted the electrical plug. Then I cleared the DTC with my sc3865.

Let's see if that solves the problem, will post back with results!
 
Reply




All times are GMT -4. The time now is 11:56 AM.