Also, Was thinking about replacing my Alternator with a higher performance one, due to me having a rather large stereo system, and since im putting a E-Fan in I think i may have to do this. What do you think, and is there an alternator you would suggest?

 

Some of them came stock with a 136 amp alternator. It would be a direct bolt-on as well.

So far as I am concerned, there is no such thing really as going 'too big' with the alternator. (so long as it doesn't stall the engine when the field coils are energized. )

 

http://www.summitracing.com/parts/CCA-2103/

or

http://www.summitracing.com/parts/DCC-5249267/

?? What do you think :P

 

Go with the comp cams guy. Cheaper, and just as good of a name.

 

No need to pull the injectors or fuel rail when replacing the plenum plate and gasket. Just dissconect the fuel line and it will all come off together.

 

Wont I risk damaging the Fuel Injectors if I leave them in the intake Manifold. I plan on doing the Kegger Mod since mine is a 96 and has the center divider. Also cut the runners 1.5 "s or 1" and anyone know the optimum angle? Im guessing whatever your cutting tool will allow :P

 

Sorry about that I read over the part where you said you were going to do the kegger mod. In that case you would definitely want to remove them. The only reason I said you don't need to remove the injectors and fuel rail is because in the Haynes manual it says you need to, and a lot of people follow the book precisely and pull the injectors and fuel rail even though they don't need to.

Goodluck with it all man.

 

Still having trouble finding a CA LEGAL timing set that will fit on my vehicle. Anyone got any suggestions? Im ordering from summit racing these are what im looking at:

http://www.summitracing.com/parts/CLO-9-1103/
http://www.summitracing.com/parts/CCA-2103/

There are so many types just real confused.

Saw that C-3072 went in on this thread
https://dodgeforum.com/forum/2nd-gen...er-pump-2.html

but i cant find it on summit only ebay

 

Either of those linked should work just fine, and, even being in cali, I don't think you need a carb EO number for those, do you????

 

HeyYou can I just tell you that you are &(*^$@#*&^%@*(&^ing AWESOME. needed someone to tell me that and you got back to me in like 20 seconds. You ARE THE MAN. ordering right now