gaaahhhhh this cant be happening
#71
#72
#73
sorry about that, left the 'puter on and logged in, and my buddy decided to have a little fun with my account, at your expense, merc.
Last laugh it's on him though, he's driving one of those damn chevy trucks that looks like it's constantly smiling all the time. I'm waiting for it to break down, then I'll leave him stranded, staring at that goofy *** grin.
I've edited the old post, if you and zman edit your quotes, it'll be gone.
Last edited by aim4squirrels; 09-23-2011 at 11:09 PM.
#74
well some bad news......
other than the leak there is a new problem.
starting the truck this morning there was a loudtick/knock coming from the top end, i added a quart of oil, cause it was about a quart low. sound went away after a little bit.
after that truck ran just fine, plenty of power, and everything.
pulling up to the light at work, my check gauges light came on, and my oil pressure gauge read 0.
pulled into the parking lot, and parked, shut the truck off. i waited a few seconds, and started her back up and the oil pressure was back up to normal.
did the same thing coming home, dropped to 0, shut the truck off, restarted it and it was fine.
could it be the oil pressure sender, or the pumo, or what? i dont have a mechanical gauge to check it.
if i can find a gauge, where would i plug it in?
any helpt is appreciated, thanks guys!
other than the leak there is a new problem.
starting the truck this morning there was a loudtick/knock coming from the top end, i added a quart of oil, cause it was about a quart low. sound went away after a little bit.
after that truck ran just fine, plenty of power, and everything.
pulling up to the light at work, my check gauges light came on, and my oil pressure gauge read 0.
pulled into the parking lot, and parked, shut the truck off. i waited a few seconds, and started her back up and the oil pressure was back up to normal.
did the same thing coming home, dropped to 0, shut the truck off, restarted it and it was fine.
could it be the oil pressure sender, or the pumo, or what? i dont have a mechanical gauge to check it.
if i can find a gauge, where would i plug it in?
any helpt is appreciated, thanks guys!
#76
#77
#78
What do yall think?
#80