Scrubbing tires... HELP!!!!
#21
09-29-2011 | 05:16 PM
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Without knowing the back spacing. I'd say you are on the right tack in getting some help from the wife, to see if and where they are rubbing.
but in black 
#22
09-29-2011 | 05:20 PM
Veteran
Joined: Jun 2011
Posts: 372
Likes: 1
From: Anderson, SC
http://www.jegs.com/p/American-Racin...58288/10002/-1
#23
09-29-2011 | 05:47 PM
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
unless im looking at it wrong, all the 16x8 have 4.5 backspacing
http://www.jegs.com/p/American-Racin...58288/10002/-1
http://www.jegs.com/p/American-Racin...58288/10002/-1
#24
09-29-2011 | 06:22 PM
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Upon further review. 1500's do come with 16x7's and have 5" backspacing along with a a D44 front axle. 2500's have 16x8's and a D60. And depending on what wheel used(steel or alum.) up to 6.25 backspacing. Here is some info that nay be helpful. But you still need to see whats rubbing. 
http://dodgeram.org/tech/specs/wheel/specs.htm
http://dodgeram.org/tech/specs/wheel/specs.htm
#25
09-29-2011 | 06:22 PM
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Not that it's gonna help the OP, but I just figured I'd share. I'm now an official member of the "Scrub Club"...
https://dodgeforum.com/forum/jeeps/3...ml#post2608094
https://dodgeforum.com/forum/jeeps/3...ml#post2608094