trans relay ? really? what does it do...96 v10
Thread Starter
|
Rookie
Joined: Sep 2011
Posts: 59
Likes: 0
From: DILLSBURG , PA
soldered 8 wires and heatshrink about 5 inches from plug and tranny shifts smooth and od works perfect, downsshift is great
thanks to everyone that helped on dodge forum----the best!
PROBLEM FIXED!
thanks to everyone that helped on dodge forum----the best!
PROBLEM FIXED!
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
At first I was wondering how this happened, but in the original thread, it appears the tranny was replaced 650 miles ago. The PO couldn't get the plug off and just tore it off. Or didn't see it and dropped the tranny with it still connected. Either way, that might a problem. 
Administrator
Joined: Apr 2010
Posts: 87,464
Likes: 4,220
From: Clayton MI
13 year old (and change....) thread....
I believe he found that the wires were pulling out of the 8 pin connector down at the trans, and shorting together. Not an uncommon happenstance for these trucks.
I believe he found that the wires were pulling out of the 8 pin connector down at the trans, and shorting together. Not an uncommon happenstance for these trucks.