Which way does it need to be bent, does anyone have a picture to show which way you have to bend it? i am having alittle trouble with it

 

go to the bone yard and pick one up. there a dime a dozen.

 

You need a 3/4 inch offset. Two bends.

 

3/4 inch offset. Pretty easy to do, I started with a c clamp and vice grips but it kept popping out so I just hulked it over a piece of wood and got away with the result. The inside of the filter is very forgiving.

 

also a bolt from a dakot or a durango with a magnum motor should work as well

 

 

Damn it... zman beat me to it I took my good ole time finding the pic lol, and didn't realize you posted it till I went to post

 

Z man you are awesome! but hey is this the same one? i'd rather buy it already bent. http://shop.advanceautoparts.com/web...P|GRP2019_____

and one more thing, can anyone link the breather from advanceauto for me, thanks

 

Look in the FAQ/DIY section. Theres a DIY bud. You have to do some of the leg work, you lazy bastad! LOL And yea, that one from advance looks to be the same. But I'll be surprised if they have it in stock.

 

Haha yes when i am unsure about things i am a lazy one. They didnt have it in stock, so i ordered, $8.68 shipped, My dad already has an old edelbrock 14x3 with a new K&N with it that came out of his 73 gran prix.

But the reason im asking about the breather is because the DIY for the 14x3 says "no stores had 1" but 1" 1/4 should work" , so which should i go with that will make a better fit, lol

thanks again Zman!