time to do a double roller t chain
#11
11-05-2011, 04:28 AM
Veteran
Join Date: Dec 2009
Location: converse tx orig. from pa.
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
i just went to the DODGE dealer and ordered MOPAR PERFORMANCE double row roller timing set for my 93 5.2 magnum,what a difference in power.
my engine at the time had 127,000 mi. ran good but on hard accel then when coming back to idle in park it would stumble/almost stall. this was because of all the old timing chain stretch a good inch or so.
i think it cost about 75 at the dealer. good luck
my engine at the time had 127,000 mi. ran good but on hard accel then when coming back to idle in park it would stumble/almost stall. this was because of all the old timing chain stretch a good inch or so.
i think it cost about 75 at the dealer. good luck
#12
11-05-2011, 04:35 AM
#13
11-05-2011, 08:45 PM
Veteran
Join Date: Dec 2009
Location: converse tx orig. from pa.
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
#14
11-05-2011, 09:15 PM
http://www.oreillyauto.com/site/c/de...388P&ppt=C0141
is this a double roller timeing chain?
i'm gonna pull my truck apart tomorrow and i figure i'll just buy one from a local place
is this a double roller timeing chain?
i'm gonna pull my truck apart tomorrow and i figure i'll just buy one from a local place
Yes. NOte the two rows of teeth on the cam gear.
I got the Mopar Performance from these guys. Engine runs great now. http://www.mopartsracing.com/parts/ram.html. They shipped it out fast. I also bought the chain tensioner.
Last edited by gdstock; 11-05-2011 at 09:18 PM.