2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

vacuum leak.. wheres this supposed to go?

Thread Tools
 
Search this Thread
 
Old Dec 22, 2011 | 10:00 PM
  #21  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,482
Likes: 4,223
From: Clayton MI
Default

Not to rain (snow?) on your parade, but, you may have to drop the dash to find it..... Good time to replace heater/evap cores?
 
Reply
Old Dec 23, 2011 | 01:42 AM
  #22  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

You can pull the screws along the front of dash lower steering col and loosen hinge screws in dash and drop back about 8". Should have access then.
 
Reply
Old Dec 23, 2011 | 06:06 AM
  #23  
BigBlue83's Avatar
BigBlue83
Thread Starter
|
Veteran
Joined: Oct 2011
Posts: 444
Likes: 0
From: Hartford CT
Default

Originally Posted by gdstock
You can pull the screws along the front of dash lower steering col and loosen hinge screws in dash and drop back about 8". Should have access then.
i will check that out... thank you
 
Reply
Old Jan 30, 2012 | 08:19 PM
  #24  
BigBlue83's Avatar
BigBlue83
Thread Starter
|
Veteran
Joined: Oct 2011
Posts: 444
Likes: 0
From: Hartford CT
Default

feeling a lot better and made it into work (cant wait to work on the truck and do the compression test this weekend so i can do plenum and new exhaust. anyways at lunch time today i took a closer look at the broken vac line i have coming out of the firewall on the passenger side. its the one that goes all the way into the dash However theres still about and inch or two coming out that i hadnt noticed before. so insted of pulling the the whole dash im wondering (if only a temp fix till spring) if theres a piece i can buy from the dealership or autozone or some where that i can buy to reconnect the two pieces. i might be able to electrical tape the two back together but is there like a hallow tube that has two ends that i can enter both pieces into to reconnect them together? or could i rig something up??? ill redo the line in the spring just trying to post pone pulling the dash and all that for now... its cold out. lol
 
Reply
Old Jan 30, 2012 | 09:10 PM
  #25  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,482
Likes: 4,223
From: Clayton MI
Default

Just use a short piece of rubber vacuum line that fits nice and tight over the plastic. It's a permanent fix.
 
Reply
Old Jan 31, 2012 | 02:29 AM
  #26  
Wh1t3NuKle's Avatar
Wh1t3NuKle
Champion
Joined: Sep 2011
Posts: 3,891
Likes: 8
From: NorCal
Default

Hey Blue,

Any of those stores will have an assortment pack of fittings specifically for vacuum shiz. I'm sure HeyYou's suggestion will work too. Just thought to mention that they are at the store.
 
Reply
Old Jan 31, 2012 | 06:12 AM
  #27  
BigBlue83's Avatar
BigBlue83
Thread Starter
|
Veteran
Joined: Oct 2011
Posts: 444
Likes: 0
From: Hartford CT
Default

thanks guys. as you know im new too all this and just discovering my interest. I will stop by autozone at lunch or after work (end of month so i work LATE!) and fix that up. you know my truck is coming along nicely... the fog lights started working when i put a new battery in. this vac leak is about to get done. its all coming together. still gotto pull the switch and get my dash lights on, its a pain sometimes not knowing how fast ur driving on the highway. anyways thanks again
 
Reply
Old Feb 1, 2012 | 04:17 PM
  #28  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

Just keep plugging away. You are making progress. It takes a while to get all of the issues resolved on a vehicle as you have to deal with neglect and abuse by prevuous owners.
 
Reply
Old Dec 23, 2019 | 07:36 PM
  #29  
Thomas Jeffrey Lambert's Avatar
Thomas Jeffrey Lambert
Registered User
Joined: Dec 2019
Posts: 1
Likes: 0
Default

Did you figure out where the line went?
 
Reply
Old Dec 23, 2019 | 08:01 PM
  #30  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,482
Likes: 4,223
From: Clayton MI
Default

Originally Posted by Thomas Jeffrey Lambert
Did you figure out where the line went?
IF you are having an issue, you should start a new thread, rather than resurrect a 7 year old one. Most of the folks in this thread aren't around any more.
 
Reply



All times are GMT -4. The time now is 10:21 AM.