AS of tonight I now have the money + some to get the Hughes intake kit. If there was one more thing to add to this what do you think I should get. I have nice headers and douls, so what should I look at along with the intake. I also have installed 456 gears so I have that covered as well

 

SCT Tuner.

 

I should have enogh money to get one. I'm not sure of the tune in the truck and I'm not sure what has all been done to the motor since I got it this way as far as the motor goes. Has alot of ***** for a 318. My 01 didn't have no where near the power this truck has and they are or were both 318. Was there a change from the 99 to 01. I have the 99 now

 

Death flash came stock on newer trucks. Check your PCM and see if there is a sticker with an "authorized software update" on it.....

 

Where can I find the PCM at and is it some thing I can go check out now?

 

Yes. It is on the passenger side of the firewall, all the way to the outside. The thing with all the wires going to it

 

I'm thinking the lower gears are where the ***** are coming from. Assuming the castrated truck had stock gear ratio. But enough talk about gonads.

 

1.7roller rocks and a 50mm tb ,,, but save ur money on the tb and mod ur own

 

Well, I did place my ordered for my intake I also see someone talking about modding my TB, Can someone tell me more about that? I have to put on hold any more goodies for now. I had to brake down and get a new paint gun at 400 dollars, but with it I can make more money then buy more goodies

 

Paint gun? $400? Must be some paint gun!