2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

engine rattle sound

Thread Tools
 
Search this Thread
 
  #1  
Old 05-15-2012, 09:58 AM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default engine rattle sound

Hi guys, I will do my best to descibe the situation. Engine is a 5.2 and as 274000Km on it and I only own the truck since december so I don't know the history of the truck. I get that ratteling sound when I drive at low RPM and I should be in a lower gear. If I try to accelerate in that situation I hear the ratteling coming from the engine. I was thinking if that could be the rockers adjustment or is it just a bad driving habit?
 

Last edited by ZeroZero3; 05-15-2012 at 10:00 AM. Reason: info added
  #2  
Old 05-15-2012, 10:06 AM
billcart's Avatar
billcart
billcart is offline
Professional
Join Date: Aug 2010
Location: Corpus Christi, TX
Posts: 204
Likes: 0
Received 0 Likes on 0 Posts
Default

If it sounds like a can of marbles it might be the intake plenum gasket. You can diagnosis this easier by following this link: https://dodgeforum.com/forum/2nd-gen...um-thread.html
 
  #3  
Old 05-15-2012, 10:18 AM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah that would probably discribe the sound pretty good. I am checking your link right now, thanks.
 
  #4  
Old 05-15-2012, 10:24 AM
billcart's Avatar
billcart
billcart is offline
Professional
Join Date: Aug 2010
Location: Corpus Christi, TX
Posts: 204
Likes: 0
Received 0 Likes on 0 Posts
Default

Good luck. Let us know what you find. The plenum is not that hard to do. Just time consuming.
 
  #5  
Old 05-15-2012, 10:31 AM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

It makes a whole lot of sense now. Truck pretty much have all the symptoms describe in the post. I will check the Cat first but I am pretty sure it's the plenum now. I am not worried about fixing it and being time consuming since I am on leave until november lol.
Thanks buddy.
 
  #6  
Old 05-15-2012, 10:42 AM
Wh1t3NuKle's Avatar
Wh1t3NuKle
Wh1t3NuKle is offline
Champion
Join Date: Sep 2011
Location: NorCal
Posts: 3,891
Likes: 0
Received 8 Likes on 6 Posts
Default

Have you thought to check the condition of the PCV valve, located on one of the valve covers? Different years have passenger side vs driver side. It will have a hose going to the intake manifold.
 
  #7  
Old 05-15-2012, 11:08 AM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes I will check that to.
 
  #8  
Old 05-15-2012, 01:09 PM
zman17's Avatar
zman17
zman17 is offline
Retired Moderator - RIP
Join Date: May 2008
Location: NH
Posts: 18,729
Likes: 0
Received 17 Likes on 16 Posts
Default

Originally Posted by ZeroZero3
It makes a whole lot of sense now. Truck pretty much have all the symptoms describe in the post. I will check the Cat first but I am pretty sure it's the plenum now. I am not worried about fixing it and being time consuming since I am on leave until november lol.
Thanks buddy.
If the plenum is bad, so is the cat and o2 sensors. And just so you know, there is no rocker adjustment.
 
  #9  
Old 05-15-2012, 03:20 PM
ZeroZero3's Avatar
ZeroZero3
ZeroZero3 is offline
Professional
Thread Starter
Join Date: Feb 2012
Location: Canada East Coast
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Default

PCV looks fine, seems to move freely enough, I have P0138 as a code and that puzzle me a bit. I am going to have another look inside the plenum since I got myself a nice little mirror but it didn't look like the pictures in or the videos I have seen so far. Mostly silver with some spekle have oil, should it but perfectly clean?
 
  #10  
Old 05-15-2012, 03:41 PM
billcart's Avatar
billcart
billcart is offline
Professional
Join Date: Aug 2010
Location: Corpus Christi, TX
Posts: 204
Likes: 0
Received 0 Likes on 0 Posts
Default

That's the after cat O2 sensor. I think.
 


Quick Reply: engine rattle sound



All times are GMT -4. The time now is 05:25 AM.