help with axle seals
You need no special tool for the driver side. You just have to take the whole diff apart to replace it. Then you'll need the special tool to install the passenger side seal. Which I have. I can help redneck with this, but he does everything without a manual. LOL, JK bud.
If you need help, I'm available like in the past.
If you need help, I'm available like in the past.
unfortunately, i have an auto, not by choice, couldnt find a decent 5 speed..... hahahahahahahaha
oh man.... i think i just opened up an unwanted can of worms..........
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
hahaha manuals are for sissies, unless we are talking about transmissions... then automatics are for sissies.
unfortunately, i have an auto, not by choice, couldnt find a decent 5 speed..... hahahahahahahaha
oh man.... i think i just opened up an unwanted can of worms..........
unfortunately, i have an auto, not by choice, couldnt find a decent 5 speed..... hahahahahahahaha
oh man.... i think i just opened up an unwanted can of worms..........
Well you said it not me. "id kinda like a write-up and pics, that i can go by" you mean the one's in the manual I guess. LOL.
Anyway, if you need help and want to do the work with me, I'll be more than happy to help if you feel like driving 50 or less miles.
speaking of..... do you know dave the diesel guy?
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
AS of right now yes, I still live in Raymond(depends on what the chapter 13 trustee wants to do), and the diesel guy is in Goffstown.
oh...well hopefully you can keep on keepin on in raymond. and dave the diesel man, or guy, whatever he said he was known by, lives in raymond. we bought our jeep from him.
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
He might live in Raymond, but his company is in Goffstown. Anyway who cares about that ? I've offered to help you many times , but you don't need a manual. LOL JK
yeah i know you have..... just dont have gas money to throw around like that. you could come here if you like lol.
i did the front axle seals on my 99 4x4 ...had the dana 44 in it,,,,
u need to spread the front diff no more than .50 mm to get clearance in order to get the gear assembly out of the diff.....the bearings will not clear the housing
u need to spread the front diff no more than .50 mm to get clearance in order to get the gear assembly out of the diff.....the bearings will not clear the housing
+1 on that...
Last edited by Wombat Ranger; May 20, 2012 at 02:38 PM.