new 408 dies
#21
#22
#23
#26
i want in on this one..... GD go to hughes engines, they have everything you will EVER need!
here you go GD!
here you go GD!
I bought my Eagle forged stroker crank, Eagle H Beam rods, ARP main studs, ARP head studs and ARP rod bolts and forged JE pistons for 1K shipped...Even had a new JE piston because one was scuffed.
My Fastman ported Eddy heads were 1.5K, they make power past 6200 rpm, new Manley Nextek springs w/ titanium retainers shipped for 225.00.
Took me several years to gather parts...The machine work, balance and assembly of the short block was 1540.00, I did everything else.
It pays to shop...
#27
i want in on this one..... GD go to hughes engines, they have everything you will EVER need!
here you go GD!
here you go GD!
So it is a matter of the rotating assembly, boring the block (how much?), cam, and I assume better heads...and of course nothing less than a Mega Viper behind it!
Anything else? I think I need to start figurine how much I need to put away each month to see if I need to do this.....
..
#28
#29
Killer deal....
I bought the whole 408 unassembled for 1500 shipped, block needed a sleeve so the seller didn't want to sell it, gave me 500 bucks back.
I scored a FAST XFI with all the harnesses and dual sync distributor for 1300 and a used 2 bbl M1.
Right now I'm trying to snipe a MSD two step off EBAY BUt people keep driving up the bids...I reall only want the plug, MSD doesn't just selll the plug...SCAM.
I bought the whole 408 unassembled for 1500 shipped, block needed a sleeve so the seller didn't want to sell it, gave me 500 bucks back.
I scored a FAST XFI with all the harnesses and dual sync distributor for 1300 and a used 2 bbl M1.
Right now I'm trying to snipe a MSD two step off EBAY BUt people keep driving up the bids...I reall only want the plug, MSD doesn't just selll the plug...SCAM.