2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

how can i fix my headliner

Thread Tools
 
Search this Thread
 
  #1  
Old 07-27-2012 | 07:32 PM
sconnor1992's Avatar
sconnor1992
Thread Starter
|
Registered User
Joined: Oct 2011
Posts: 6
Likes: 0
Default how can i fix my headliner

i have 97 dodge ram 1500 and the felt on the ceiling is starting to sag. what should i do to fix it or should i have it replaced by a professtional? if i did have it replaced what would it cost, its a standard cab so would that make it cheaper?
 
  #2  
Old 07-27-2012 | 07:35 PM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,862
Likes: 3,449
From: Clayton MI
Default

Cheapest would be to get some material of your choice, and recover it yourself. There is a thread around here somewhere that a member did just that, and documented it.
 
  #3  
Old 07-27-2012 | 08:40 PM
dlyter09's Avatar
dlyter09
Champion
Joined: Apr 2011
Posts: 3,574
Likes: 0
From: Harrisburg,PA
Default

Id use a staple gun
 
  #4  
Old 07-27-2012 | 10:02 PM
QuadCabLuv's Avatar
QuadCabLuv
Record Breaker
Joined: Dec 2008
Posts: 1,585
Likes: 0
Default

headliners are easy to recover, i have done several in my years. just search for a thread on it or on youtube.
 
  #5  
Old 07-30-2012 | 05:30 PM
ScottWP's Avatar
ScottWP
Registered User
Joined: Jul 2012
Posts: 1
Likes: 0
From: Central Ohio Area
Default

I had a '95 Ram Extended Cab where the cloth material on the head liner sagged. I found some thumb tacks that were the same color as the liner. Used some medium /thick super glue and pinned it back up using those. Before adding glue figure out the number of tacks and install them dry first. This sounds rediculous at first but space the tacks evenly in rows w/ exact distances apart and it doesn't look bad at all. Once you have them in place remove one at a time and apply the glue and reinstall. Using the medium to thick super glue is much easier to work w/ than the thin liquid stuff.

Scott
 
  #6  
Old 07-30-2012 | 05:55 PM
elecshoc's Avatar
elecshoc
Registered User
Joined: Jun 2012
Posts: 15
Likes: 0
Default

You fellas my laugh, but I just pulled the fabric off and used a sos pad to get the foam liner off. From there I just sprayed it with some leftover sprayon rubber coat, the kind used for tool handles. Its ok but probably could use another coat.
But I did get the seal of approval from my 15 year old daughter who seems like at this point doesn't like anything I do, so that's a plus. Haha
 
  #7  
Old 07-30-2012 | 06:43 PM
woods4life's Avatar
woods4life
Veteran
Joined: Jul 2012
Posts: 290
Likes: 0
From: Fort Myer, Va
Default

Originally Posted by dlyter09
Id use a staple gun
hahahaha slap stapler would be more fun!!
 
  #8  
Old 07-30-2012 | 08:43 PM
seabass202's Avatar
seabass202
Veteran
Joined: Jan 2008
Posts: 294
Likes: 1
From: Rotonda West, Florida
Default

most upholstery shops in my neck of the woods will remove clean and redo a headliner for about $75 bucks.
 
  #9  
Old 07-30-2012 | 08:58 PM
Ol_RedRam's Avatar
Ol_RedRam
Amateur
Joined: Apr 2012
Posts: 48
Likes: 0
From: Alabama
Default

Originally Posted by seabass202
most upholstery shops in my neck of the woods will remove clean and redo a headliner for about $75 bucks.
Daggum! That's cheap. I have an old Cutlass with T-tops and I paid $150 just to do the little bit that car has. And they were the low bidders.
 
  #10  
Old 07-31-2012 | 02:13 AM
Hahns5.2's Avatar
Hahns5.2
Record Breaker
Joined: Mar 2009
Posts: 2,181
Likes: 2
From: Battle Ground WA
Default

I just used some upholstery repair pins on mine today, it's not pretty but it beats the stupid fabric flapping in the breeze.
 




All times are GMT -4. The time now is 01:09 AM.