Power windows not working
Thread Starter
|
Professional
Joined: Jan 2011
Posts: 123
Likes: 0
From: El Paso, TX
ok so its gonna rain tonight, kinda started sprinkling when i did this but i took the door panels up and applied power to the motor using my handy dandy alligator clip jumper wires and theyre now up and the truck is locked for the night. since the fuse is good then im thinking when my battery fell over it may have pulled the power wire or ground for the switch? any thoughts?
The driver's switch has to be plugged in for the passenger switch to work. More than likely the harness plug slipped off the switch. This has happened to me in both my Ram and Durango.
You'll have to remove the panel, but just make sure the harness is plugged into the switch before you start replacing parts.
You'll have to remove the panel, but just make sure the harness is plugged into the switch before you start replacing parts.