now power high oil presure
Sep 5, 2012 | 07:45 PM
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 236
Likes: 0
From: Reynoldsville,PA
now power high oil presure
It has now power like its not firing all cylinders but starts fine it has high oil pressure and sounds like something is rattling around in the motor
Sep 5, 2012 | 07:52 PM
Joined: Apr 2010
Posts: 87,453
Likes: 4,218
From: Clayton MI
That's not good...... getting any codes? (cylinder misfire chiefly....) Might not hurt to check the plugs, and do a compression test.
Sep 5, 2012 | 07:59 PM
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 236
Likes: 0
From: Reynoldsville,PA
Noo codes to check. Ran fine to work *** soon as I got off work ****.
Sep 5, 2012 | 08:19 PM
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 236
Likes: 0
From: Reynoldsville,PA
Its firing all cylinders but its like its being ckoked... exhaust valve stuck?
Sep 5, 2012 | 08:21 PM
Joined: Apr 2010
Posts: 87,453
Likes: 4,218
From: Clayton MI
Stuck valve would give a miss. Clogged cat?
Sep 5, 2012 | 08:32 PM
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 236
Likes: 0
From: Reynoldsville,PA
Its got that rattling around though. It will rev in neutral but in gear it just dies like its getting choked out. It is running kinda hot
Sep 5, 2012 | 09:14 PM
Joined: May 2010
Posts: 1,322
Likes: 1
in order to check clogged cat, un screw the o2 sensor after the cat, see if it runs fine then, if it does then its the cat.
Sep 5, 2012 | 09:16 PM
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 236
Likes: 0
From: Reynoldsville,PA
^ thanks ill give it a try. If not looks like ill have to take it too an effing garage
Sep 6, 2012 | 09:54 AM
Joined: Apr 2010
Posts: 87,453
Likes: 4,218
From: Clayton MI
You want to remove the O2 in FRONT of the cat.
Sep 6, 2012 | 11:47 AM
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 236
Likes: 0
From: Reynoldsville,PA
I'm thinking its the cat... 110 thousand on the orig
now power high oil presure
