2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Any Advice?

Old Oct 31, 2012 | 04:55 AM
  #11  
93grandzj's Avatar
93grandzj
Professional
Joined: Aug 2010
Posts: 134
Likes: 0
From: twin cites,mn
Default

probably blew the cap and rotor. fried mine on the 93 grand i had. no start and shut off while driving. check under the cap and look for signs of wear and build up of corrosion, check rotor too. that can happen if to long between preventative maintenance. the next part under them would be your sensor to replace.
 
Reply
Old Oct 31, 2012 | 04:30 PM
  #12  
MarkM32's Avatar
MarkM32
Registered User
Joined: Oct 2012
Posts: 9
Likes: 0
Default

Spark comes from the coil into the top of the dist. cap. If this is the case, check the plug on the bottom of the coil, you can also get a visible spark tool and crank it and see what color it is. Bright blue/white is what you want. If you've got that, check out the crank position sensor.
 
Reply
Old Nov 2, 2012 | 12:00 PM
  #13  
Tess2012's Avatar
Tess2012
Thread Starter
|
Registered User
Joined: Oct 2012
Posts: 3
Likes: 0
Default

I replaced the crankshaft position sensor and started right up!
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:40 PM.