DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

trans line check valve delete

   
Old Mar 23, 2013 | 09:51 PM
Share
  #61  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default
Originally Posted by dhvaughan
....BE SURE YOU PLUMB THE REMOTE FILTER CORRECTLY TO THE (IN) PORT !!!
if you route it backwards you'll kill your trans.....

+1. Don't ask.....
 
Reply
0
Old Mar 23, 2013 | 09:57 PM
Share
  #62  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default
that will remain as the "unspeakable".
 
Reply
0
Old Mar 23, 2013 | 11:00 PM
Share
  #63  
My360's Avatar
My360
Professional
Joined: May 2012
Posts: 202
Likes: 0
From: Ottawa, Ontario
Default
I went over to Napa today to get the fittings for the delete, turns out Napa Canada and Napa US have two entirely different parts number list and different suppliers.
So, if I just take the check valve out and drill it out, will that work just as well? Any drawbacks to doing this?
 
Reply
0
Old Mar 23, 2013 | 11:02 PM
Share
  #64  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default
I drilled mine out. No problems with it. Ball is plastic or rubber.
 
Reply
0
Old Mar 23, 2013 | 11:02 PM
Share
  #65  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default
drilling it out is a good fix. just be sure and blow it out clean with air or brake cleaner.

edit. scooped by gd....
 
Reply
0
Old Mar 24, 2013 | 09:03 AM
Share
  #66  
bigaaron's Avatar
bigaaron
Thread Starter
|
Professional
Joined: May 2007
Posts: 172
Likes: 0
From: MI
Default
thanks all for the input - again
 
Reply
0
Old Mar 24, 2013 | 09:11 AM
Share
  #67  
My360's Avatar
My360
Professional
Joined: May 2012
Posts: 202
Likes: 0
From: Ottawa, Ontario
Default
Thank you, as well.
 
Reply
0
Old Mar 24, 2013 | 11:49 AM
Share
  #68  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default
I just drilled mine out too. I believe I used a 5/16" drill bit.
 
Reply
0
Old Mar 30, 2013 | 07:17 PM
Share
  #69  
Timothy Watrous's Avatar
Timothy Watrous
Professional
Joined: Nov 2012
Posts: 165
Likes: 0
From: ledyard, CT
Default
dose the 94 year have the check valve?
 
Reply
0
Old Mar 30, 2013 | 08:55 PM
Share
  #70  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default
Originally Posted by Timothy Watrous
dose the 94 year have the check valve?

I believe so. Open the hood and look.
 
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 12:57 PM.