When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Alright gods honest truth it's not white. It's like a black clip. Not in front but behind that metal brace. Oh and do I need to do the governer pressure sensor with the solenoid
Gods honest truth it's black. I see where it is but it's not white. I was wondering too do I have to replace the governer pressure sensor too with the solenoid?
ok on the tv cable it goes through a metal brace coming off the throttle body, with a bracket on the front side that is black, ang then on most models there is a white clip behind that bracket that holds the cable in place. Instead there is a black plastic piece that is black, and in a box shape, about the same size as what the white clip would be.
My '95's (46RH) is all black. Behind the metal bracket, on the pass. side is a button to push, it doesn't protrude but sits flush with the rest of it. Had to use a screwdriver to push it in to adjust the cable.