How do I take off the check valve assembly for the trani on a 96 ram 5.9 cause mine went bad n I need 2 replace the check valve

 

try here....

 

https://dodgeforum.com/forum/2nd-gen...46rh-46re.html

 

Don't replace it, drill it out, and leave it gone.

 

Yes , drill it out as stated. But you need to remove that line(which I believe is your question to begin with). You need a special tool to disconnect that line from the radiator, cheap plastic round thing that comes in an assortment of sizes available at any auto parts store. And do yourself a favor , and get a Haynes manual while you are there.

 

^ 3/8 inch fuel line disconnect. the cheap $5 on is good enough.

 

If I drill it out wont the torque converter drain over night of sitting

 

Yep.


But if you install the Sonnax Sure Cure transmission shift kit, it will allow the fluid pump to pump in park.

 

Or you could wait a minute or two after you start her up to shove it in drive...

 

no. .