2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

ABS, Check engine and Brake Lights on Help

Thread Tools
 
Search this Thread
 
Old Jul 14, 2013 | 04:09 PM
  #11  
gertie240's Avatar
gertie240
Captain
Joined: Jun 2010
Posts: 556
Likes: 2
From: San Antonio,Texas
Default

+1 on going to a good brake shop. Look on yelp for feed back about local shops then call them. I like to get to know any shop I need to use. And see if you can swing an appointment during the week. Like everyone else, those people have lives outside of work. Also a dozen doughnuts can't hurt.
 
Reply
Old Jul 15, 2013 | 11:11 AM
  #12  
DE3PT's Avatar
DE3PT
Registered User
Joined: Jul 2013
Posts: 5
Likes: 0
From: Ohio
Default

Hey man, mine dun the same thang an all i did wuz replace the sensor on top of the rear-end housin. i'm sory i cant remembr watt they call it, but its the ONLY sensor on the bak rear-end housin. i hope this helps ye.
 
Reply
Old Jul 16, 2013 | 09:41 AM
  #13  
bmcarey1988's Avatar
bmcarey1988
Thread Starter
|
Registered User
Joined: Feb 2013
Posts: 15
Likes: 0
From: Delray Beach FL
Default

Do you mean the rear end differential for the abs sensor. Ib replaced the sensor. On that.
 
Reply
Old Jul 18, 2013 | 02:00 AM
  #14  
MikeDuff's Avatar
MikeDuff
Registered User
Joined: Jul 2013
Posts: 4
Likes: 0
Default

I'm having this exact problem on my 06 1500. All three lights come on- CEL, ABS and Brake lights came on. I have scanned and all I get are codes U0120 and U1120. Any ideas?
 
Reply
Old Jul 18, 2013 | 02:01 AM
  #15  
MikeDuff's Avatar
MikeDuff
Registered User
Joined: Jul 2013
Posts: 4
Likes: 0
Default

Oh, and I have no speedo or Cruise. Everything else seems to be working though.
 
Reply
Old Jul 18, 2013 | 01:24 PM
  #16  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,461
Likes: 4,219
From: Clayton MI
Default

Originally Posted by MikeDuff
Oh, and I have no speedo or Cruise. Everything else seems to be working though.
Not exactly second gen.... but, my guess would be your rear wheel speed sensor is unplugged, or toast. Should at least solve the cruise, speedo, and ABS lites.
 
Reply
Old Jul 18, 2013 | 06:29 PM
  #17  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

Originally Posted by MikeDuff
Oh, and I have no speedo or Cruise. Everything else seems to be working though.
Post your question in the 3rd gen ram forum. Could be a common problem that one of those guys will be able to help you with.
 
Reply
Old Feb 1, 2015 | 09:38 PM
  #18  
Jasonlangan101's Avatar
Jasonlangan101
Registered User
Joined: Feb 2015
Posts: 1
Likes: 0
Default Wiring

I had the exact same problem everything worked but abs didn't also my 4x4 wouldn't engage I checked everything from fuses to sensors and nothing it was a broken wire in the main wiring harness that was the grief hope this helps
 
Reply




All times are GMT -4. The time now is 07:06 AM.