My fog lights will not for for ****. I tested the relay and it is good. Using a multi-meter, I am not getting any power to the fog relay. I do get power from my headlight relay. I believe my switch on the dash is broke. (yes the bulbs are new)

Can I have a jump wire from my headlight relay to my fog light relay? Or what should I do?

In the DIY section there is a really good write up about rewiring the weak headlight switchs we have. Heavy gauge wire is a must have, and maybe a trip to the junkyard for parts.

I can't find a write up for it... Only thing it has is a rewire for fog light stay on for high beams

Just replace the switch, why mess around with rewiring for no reason.

Welcome to DF

Please take the time to fill out all your trucks info, add it to your sig just go into your user cp and fill out the info.

Also there isn't a dash light showing that the fog lights are coming on.

If you have the fog switch built into the headlight switch there should be a little light that comes on in the corner of the switch.

Well I have no light coming on or anything. Is it just the switch or should I check any where like the wiring or ground wire by the fog light? Would this matter sense I'm not getting the switch to light up?

I had no low beams, only high beams. Turned out it was the multi-function switch in the steering column.

Stupid thing is $75, but it was a very easy change (only complication is you need security torx (the star torx with a hole in the middle)).

I tried the headlight, foglight switch first and the new one made no difference. O'Reilly's took back the new one I had bought because I was buying the multi-function instead.

i have a 1999 1500 sport btw