2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Replacing an infinity system, front coaxials working, rear aren't

Thread Tools
 
Search this Thread
 
Old Jan 2, 2014 | 08:58 PM
  #1  
Sgrrsh26's Avatar
Sgrrsh26
Thread Starter
|
Registered User
Joined: Jan 2014
Posts: 2
Likes: 0
Default Replacing an infinity system, front coaxials working, rear aren't

My 99 ram came with a blown infinity system. Replaced the head unit, hard wired coaxials in the front with no problem. Just wired up a rear speaker and no sound. Is that because the amp on the infinity speaker is originally powering the rear? Might I have to rewire the harness up in the front door panel to run the rear speakers off the Hu?
 
Reply
Old Jan 14, 2014 | 12:04 AM
  #2  
YouCantKeepAGoodVanDown's Avatar
YouCantKeepAGoodVanDown
Rookie
Joined: Nov 2013
Posts: 51
Likes: 2
Default

From my experiences with inifity systems, yes. Every one I've ran into I've had to bypass the amplifier completely
 
Reply
Old Jan 14, 2014 | 12:34 PM
  #3  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,453
Likes: 4,218
From: Clayton MI
Default

Either that, or make sure the amps get powered when the radio is on.
 
Reply
Old Jan 15, 2014 | 11:57 AM
  #4  
BrandonBuc'em's Avatar
BrandonBuc'em
Veteran
Joined: Apr 2013
Posts: 431
Likes: 0
From: PA
Default

i swear the stock stereos in these trucks are just bad! replace it all.
 
Reply
Old Jan 15, 2014 | 11:01 PM
  #5  
superdodge69's Avatar
superdodge69
Registered User
Joined: Jun 2013
Posts: 2
Likes: 0
Default

i just cut the wires to the amps in each front door and connected the wires but i would recommend just to get a aftermarket deck and 4 channel amp then run new speaker wire to each speaker so you dont have to deal with trying to figure out whats what
 
Reply




All times are GMT -4. The time now is 04:51 AM.