When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have a 1997 Dodge Ram 1500 4x4 5.9 360. I was driving down my driveway to check the mail I stopped the truck and turned it off stepped out for a minute or two. When I got back in I turned the key to the on position. When I did a secondary buzzer went off and now my seat belt light won't turn off? I have inspection coming due soon so I'd really appreciate some advice.
Last edited by 1997_dodge; Jan 11, 2014 at 03:13 PM.
I checked both buckles. Driver nor passenger side have any connectors attached. Any other ideas. And to be clear the light that's staying on is located next to the brake light.
Well I just pulled the entire front seat section completely out to be 100% sure. And there not one single connector nor anywhere to connect anything on the seats. What's strange is I've owned the truck since 02/15/13 and the light for the first time stayed on all the time starting on 01/10/14. So something must of come loose or something else. I already checked the fuses and used a volt tester to check for power in the fuse box. So I'm stumped.
Ok, appears the seat belt switch is on the seat belt..... inside the body panel where the reel is. One wire connector, (maybe two...) feed wire is Light green with Red trace.