"elp" unkle clusters in trouble
#1
"elp" unkle clusters in trouble
96 5.2 cluster temp / volt not working autozone said change this change that "wtf",so i did cleaned up any ground wire the eye can see,put atest light on the 2wire thong im prong light came on one side of cable prong,connecter if u will,dont know if there is afuse cince oil,rpm,speedo work,any help is good help
#4
96 5.2 cluster temp / volt not working autozone said change this change that "wtf",so i did cleaned up any ground wire the eye can see,put atest light on the 2wire thong im prong light came on one side of cable prong,connecter if u will,dont know if there is afuse cince oil,rpm,speedo work,any help is good help
From what I can piece together, you're having problems with your temperature gauge and your voltage meter on your gauges. So you changed your dash cluster and cleaned your grounds. Now you're asking if there's any fuses or circuits that could cause a short in the system?
Is this translation somewhat correct?
#5
#6
hello again ,i did change the coolant tempature sencer *** well as the tempature switch,now the cluster on the other hand no i did not change ,every other gauge rpm/oil/speed works,but if its the cluster i will be doing so ,now if this helps just bought this buitifull excab 2 week ago high mil but runs like a champ,the guy i got it from jump it to start ,ran,then got a fresh used battery from another truck hook cables on wrong sent sparks a flying,thinking could have fryed somthing so i look to you`s for help as i am a diy..er
#7
Trending Topics
#10