When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Well crap haha I don't have the money for a 4or 5 inch lift so I guess I'll just do the 2 or 3 inch cool spacers I guess then haha
Just buy some lift 2"-3" lift coils and call er good. You could even look for springs from Offroad edition Ram for the lift you want. Personally I would not use a 3" spacer... seems sketchy in my opinion.
2-3 inches in front will fairly well level the truck. If you actually use your truck AS a truck..... a load/heavy trailer will have you squatting in back. If it becomes an issue, address it. If it doesn't, don't worry about it.
If you decide to address it though, go with a full length add-a-leaf.
Just buy 2 or 3 inch lift coil springs? An should I raise the rear up anymore?
Yes use coil springs. This will level your truck, if you load the bed down regularly get a 2" add-a-leaf, in the long form
Originally Posted by HeyYou
2-3 inches in front will fairly well level the truck. If you actually use your truck AS a truck..... a load/heavy trailer will have you squatting in back. If it becomes an issue, address it. If it doesn't, don't worry about it.
If you decide to address it though, go with a full length add-a-leaf.