I did a couple searches, didn't find any. Looking for a 2500 second gen with these wheels - pulled from a 2014.

<img src="http://users.zoominternet.net/~pbaker/truck2/20rims1.jpg">

 

Thought they changed the bolt pattern at some point??

 

Same bolt pattern, all they did change the lugs over to metric : 14-1.5mm instead of 9/16-18. I don't know about the back spacing.

Replacement tires are outrageously priced, which drives the price down on these pretty good.

 

saw it on CL... still haven't seen these on a 2nd gen.

 

found one with the 20s on it ... gotta luv CraigsList!

 

Must be rare birds. Took ya a while to find it.

 

Had given up... I already bought the 2014 rims - but they're sitting in the shed waiting for me to finish R&R of this 2000.... the day job keeping me too busy...

 

I have a set of mumba m4 20x10 with 38x15.50x20 Mikey Thompson mtz for my 2nd gen I'm currently running military bead locks 16.5x8 re-centered to 5 on 5.5 with Mackey Thompson bear claws bias ply with side bitters 40x16x16.5

 

I have seen one 2nd gen 2500 with 3rd gen rims on youtube. the center caps on the rears wouldn't push quite all the way on without trimming the inside. the inside edge of the faux lugnuts was just barely hitting the axle shaft bolt heads. it was 17s from a '06 being put on a '99 2wd and not 20s from a '14 so that could make a difference.

 

KInda blue eyes, but it was long expired by now. Only had this picture because I had a screenshots of the add for contact info.