Brake light always on
#1
Brake light always on
Hi,
So I bought a 00' 2500 for $600 and the brake light and ABS was constantly on. The truck has a ton of rust and the lines were leaking. Long story short I just had all the lines and master cylinder replaced. The lights were off and I parked the truck and engaged the parking brake. The light came on and I shut off the truck. This morning as I drive I release the brake and the light stays on. Any ideas on what it could be?
Side note:
Any good tutorials for removing front fenders?
So I bought a 00' 2500 for $600 and the brake light and ABS was constantly on. The truck has a ton of rust and the lines were leaking. Long story short I just had all the lines and master cylinder replaced. The lights were off and I parked the truck and engaged the parking brake. The light came on and I shut off the truck. This morning as I drive I release the brake and the light stays on. Any ideas on what it could be?
Side note:
Any good tutorials for removing front fenders?
#4
#6
#7
Trending Topics
#8
#10
Front Fenders
Factory fenders are welded to the inner steel wheel well. Repops are usually just the outer, left up to the body guy to remove the inner from the old outer and weld it back together. Or they just buy both pieces new and weld them together. I bought used southern fenders, small amount of poly putty, and scuff/shoot paint.
Since the outer and inner are welded together, EVERYTHING connected to the inner needs to come off. Left side sux the worst.
Since the outer and inner are welded together, EVERYTHING connected to the inner needs to come off. Left side sux the worst.