2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Brake Controller Harness Plug

Thread Tools
 
Search this Thread
 
  #1  
Old 05-19-2016, 09:08 PM
XxJamesAxX's Avatar
XxJamesAxX
XxJamesAxX is offline
Registered User
Thread Starter
Join Date: Jul 2013
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default Brake Controller Harness Plug

Ok guys I have a 2001 2500 quad cab 4x4 truck with the 5.9V8.

My question is wouldn't all 2500 trucks come with the factory tow package?

I ask because I cant find the blue plug that is suppose to under the dash to plug
the brake controller in. The truck does have a receiver and 7 way plug but im unsure if those are factory.

Whats your thoughts? I was hoping adding a brake controller would not require wire splicing.

Thanks in advance
 
  #2  
Old 05-19-2016, 09:29 PM
HeyYou's Avatar
HeyYou
HeyYou is online now
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,866
Likes: 0
Received 3,195 Likes on 2,948 Posts
Default

Check your build sheet. There is a link in the faq/diy section to get one from Chrysler. Either that, or most any dealer should be able to get you one as well.

Tow package was an option. You may or may not have it.
 
  #3  
Old 05-20-2016, 12:11 AM
XxJamesAxX's Avatar
XxJamesAxX
XxJamesAxX is offline
Registered User
Thread Starter
Join Date: Jul 2013
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks, got the build sheet. It doesn't say tow package any where specifically but it does say

ADJ - heavy duty service group
AHJ - camper special group
AJK - convenience group

Any idea what those 3 things consist of?
 
  #4  
Old 05-20-2016, 10:30 AM
HeyYou's Avatar
HeyYou
HeyYou is online now
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,866
Likes: 0
Received 3,195 Likes on 2,948 Posts
Default

Camper special just adds heavy duty springs, and rear sway bar. Nothing for trailer brakes. That was part of the tow package.

That said, it's a rare occasion indeed where dodge actually used model specific harnesses in their trucks. Most of them have all the hookups for the options, whether it had the options or not....... Of course, there are always exceptions......

I can't find much specific info on the others.
 
  #5  
Old 05-20-2016, 02:20 PM
XxJamesAxX's Avatar
XxJamesAxX
XxJamesAxX is offline
Registered User
Thread Starter
Join Date: Jul 2013
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the replies, really surprises me this truck doesn't have the plug. I've looked all over under the dash though and don't see it. Even looked for cut wires just in case someone had cut out the plug for some reason.

I guess now on to figure out how to splice into what's already there. Thanks again
 
  #6  
Old 05-20-2016, 02:38 PM
HeyYou's Avatar
HeyYou
HeyYou is online now
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,866
Likes: 0
Received 3,195 Likes on 2,948 Posts
Default

If you don't already have one, you can download a service manual for your truck from this thread. Wiring diagrams are in section 8W. Hopefully make your life a bit easier.
 
  #7  
Old 05-21-2016, 09:52 AM
Moparite's Avatar
Moparite
Moparite is online now
Grand Champion
Join Date: Feb 2015
Posts: 6,045
Likes: 0
Received 349 Likes on 329 Posts
Default

Mine has the trailer package and when i went to hook up the brake controller i also couldn't find it. I called three dealerships and two of them didn't even know what i was talking about. If it's there it will be between the steering column and the kick panel. I believe it was tied up with the rest of the harness so it didn't fall down. Just move some of the wires around, If it's there you'll find it.
 
  #8  
Old 05-21-2016, 01:13 PM
dbbd1's Avatar
dbbd1
dbbd1 is offline
Record Breaker
Join Date: Sep 2015
Posts: 1,552
Likes: 0
Received 4 Likes on 4 Posts
Default

When I get home tomorrow, I can take a pic of mine. It WAS hard to find.
 
  #9  
Old 05-21-2016, 09:03 PM
Friar Tuck's Avatar
Friar Tuck
Friar Tuck is offline
Captain
Join Date: Apr 2016
Location: Alabama
Posts: 647
Likes: 0
Received 1 Like on 1 Post
Default

As Moparite says, it's supposed to be under the dash somewhere around the steering column. The manual says it's a 4-way connector. I can send you the pinout when you find it.
 
  #10  
Old 05-22-2016, 09:32 AM
XxJamesAxX's Avatar
XxJamesAxX
XxJamesAxX is offline
Registered User
Thread Starter
Join Date: Jul 2013
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

I'll give it another look but I'm confident there's nothing there. I've seen a few pictures and it's been blue 4 pin connector but i can't find one.

Maybe if someone could take a picture of there's showing where the wires come from I could try to track it down better? Thanks for all input guys
 


Quick Reply: Brake Controller Harness Plug



All times are GMT -4. The time now is 04:11 PM.