2001 ram 1500 5.9L NEED HELP!
#1
2001 ram 1500 5.9L NEED HELP!
OK so I replaced my crank sensor, cam sensor, cap and rotor all the plugs and wires and the ignition coil. When I start my truck it is fine. It isn't until it get up to temp where it starts acting up. My tach goes anywhere from a couple hundred difference to 1000 rpm difference. It doesn't respond when I hit the throttle it also backfires and shudders like it isn't firing correct. It has an active code for the crank sensor but like I said I just replaced that, but when I shut it off a couple of times it fixes it's self and doesn't seem to do it again. Please help!!!
#2
#4
May wanna return it, and get one from the dealer.... See if that doesn't address the code.
Also, keep in mind, depending on which exact code you are getting, many of them refer to both cam, and crank sensors.... so, it's a crap shoot which one is actually bad. Cam sensor is at least easier to change. (it's under the distributor cap, parts stores refer to it as 'pick up coil'.)
Also, keep in mind, depending on which exact code you are getting, many of them refer to both cam, and crank sensors.... so, it's a crap shoot which one is actually bad. Cam sensor is at least easier to change. (it's under the distributor cap, parts stores refer to it as 'pick up coil'.)
#6
#7
Trending Topics
#8
#10