As was stated before, the cover is likely OK. Should be able to tap in a new bushing. As for the double cardon kit, I believe the flat side goes out - take a look at that YouTube video again for that detail to be sure.

 

ya that's what I gonna try... get the 25 set not spending 100 bucks frig.. .and if it fits loose in there then ill get a used one and put this new one in


thanks for all the help so far.. very appreciative

 

i think something went wrong
i put that ball in the cardon thing but that ball doesnt swival now like it did out of hte package is that normal because i pressed in the cup

 

or will it loosen up after driving it for a while

 

heres video of the cardon bearing thing cant get the seal on but you can see i cant move the damn thing will it loosen up

 

I'd re-look at this video closely and be sure to press the piece all the way in, which may be why your oil seal may not go on -

 

I watched it several times.. and I pressed the thing as far as it go in the ball thing.. and like you seen in my video it doesn't turn at all will it loosen up? is that normal?


ill try hitting it more getting sseal in

 

there is no way you can get this seal on i tried pressing it in hammer the **** out of it.. with the socket... all its doing is bending and wearing the seal down this video isnt good enough to show how long its taken i played around and hour all together trying to hammer this stupid seal in... video doesnt even say is that ball stiff in there.. as i cant even move the ball since i put it in there it doesnt show how deep that thing goes in as can i go deeper or what i uploading a video
frustrated cuz now this ball is sezied in there and i dont think thats right
65 bucks and doesnt work

 

here is another video u see i cant get it on i dunno how that guy got it on... i frustrated as hell

here is video so i stuck

and this dust cover he has in video is that something i gotta buy extra???

 

Did you use the correct size socket to press it in as per the video? Also, I suspect that it likely won't move side to side with your finger.