2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

driveline noise

Thread Tools
 
Search this Thread
 
  #1  
Old 09-30-2017, 04:30 PM
oledad's Avatar
oledad
oledad is offline
Registered User
Thread Starter
Join Date: Sep 2017
Location: Foxworth, Ms.
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default driveline noise

I have a 2001 Ram 1500 Laramie XLT 2 wheel drive, 5.2 L engine with 152,000 miles. I have developed a strange noise somewhere in the driveline. Put the rear on jackstands and I get the "squeaking" noise at low throttle in forward gears only. Makes absolutely no noise in reverse. I bought the truck brand new in 2001 and have put every mile on it. I do occasionally tow my car hauler behind it. Any ideas? Transmission? Pinion? Rear end? Does not seem to be u-joints in the driveshaft. Thanks, Steve Bennett
 
  #2  
Old 09-30-2017, 05:36 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,013
Likes: 0
Received 3,211 Likes on 2,962 Posts
Default

U-joints would be my first guess, bad spots loaded in one direction, but, not in the other. If they are original, it wouldn't hurt to inspect them. Pull the driveshaft, see how they feel.
 
  #3  
Old 09-30-2017, 07:53 PM
oledad's Avatar
oledad
oledad is offline
Registered User
Thread Starter
Join Date: Sep 2017
Location: Foxworth, Ms.
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I'll pull the driveshaft tomorrow after church and replace front and rear. I replaced the front at 123,000 (2013) but the rear is the original. Thanks for the input. Steve
 
  #4  
Old 09-30-2017, 10:37 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,013
Likes: 0
Received 3,211 Likes on 2,962 Posts
Default

Let us know what you find.
 
  #5  
Old 10-02-2017, 11:34 AM
oledad's Avatar
oledad
oledad is offline
Registered User
Thread Starter
Join Date: Sep 2017
Location: Foxworth, Ms.
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Pulled the driveshaft this morning and found the rear u-joint (original from 2001) had 2 dry sockets. Factory sealed so no way to lube. Replaced with a new MOOG u-joint with grease zerk. No driveline noise at all. Thanks for confirming my suspicions and saving me a costly bill at the dealership. Steve
 
  #6  
Old 10-02-2017, 01:23 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,013
Likes: 0
Received 3,211 Likes on 2,962 Posts
Default

Gotta love the easy ones.
 



Quick Reply: driveline noise



All times are GMT -4. The time now is 02:02 AM.