84 is a dead giveaway that the PCM was replaced

 

got a new pcm through flagship one that was flashed to my vin, still same issues as of late, rough idle that putters out. I can go back to shotgunning sensors I haven’t replaced yet like iac(honestly don’t remember because I went though so many). Sorry for the long *** drawn out post but I’ll check into anything y’all suggest

 

Refresh my memory, what's the problem?

 

originally it was stalling when put in gear, now it has a rough idle that putters out. I’ll look and list again what sensors I’ve replaced

 

Both o2 sensors, battery and battery terminals, idle air control sensor, Map sensor, engine coolant temp sensor, crank position sensor, and now a flashed pcm

 

What brand sensors? How is the fuel pressure? By "putters out" I assume you mean slowly die, if that is the case, I would hook up a fuel gauge and watch it while the truck is idling

 

mostly duralast sensors as that’s what is readily available, I did go mopar for the crank position sensor though. I rented a fuel tester but as I was trying to use it earlier I couldn’t get the truck to run at all really, I’ll try again tmrw and see if I can get any data

 

Them Duralast sensors could be your problem. When it doesn't want to start, see what you are missing