injector P0201 & P0208 issue

Subscribe
Apr 10, 2018 | 04:46 PM
  #1  
2001 Dodge Ram 2500 5.9L Gas Vin:Z runs roughtchanged injector 1 & 8 and camshalf sensor, still same issue ran test checked wiring, even tried different PCM same codes. Im Lost now not sure what else to do
Reply 0
Apr 10, 2018 | 05:54 PM
  #2  
Check the wiring for those two injectors. Noid light makes it easy. Get one at your local parts store. See if the injectors are getting pulse signal.
Reply 0
Apr 10, 2018 | 06:03 PM
  #3  
Yes I checked and also used a Noir Light, I'll start the truck code p0201, clear codes and I'll check codes again p0208, I'll clear them again recheck codes and p0201 I ran pcm test replaced ground to pcm still same issues tested relays all checked out, tested fuel pressure 47psi

​​​​​​
Reply 0
Subscribe