Cam anybody with a 98-01 Ram post where the horns and purge solenoid go? I know they go on the passenger side fender but I need to see exactly where lol

 

Started getting the dash harness apart and going from a BASE CTM to a PREMIUM CTM. Got the dash pulled and the top fell into a million pieces, so have to find an actual replacement that you don't have to paint. Just have to find a few parts from the junkyard hopefully! Here's some pics for amusement

 

I ordered Stainless Brake lines (full kit) and Stainless Kevlar brake hoses (4, 1 for each wheel) which are extended 18 inches from SSTubes.com. I plan on giving them a review here. I had a caliper that was not disengaging. The caliper seized in the driver's front side and the brake pads were white (indicator that it got burnt). So I replace both calipers and pads (AutoZone lifetime warranty on both for the win). Still did it and I did the old crack the bleeder trick and it retracted. That is what lead to me ordering the hoses.

Now when I do that im going to install the factory hydroboost when it was a diesel so there will be a write-up on it, in case anyone is interested!

 

Yep, I am interested. Hydraboost will make cylinders 7 and 9 SO much easier to change.

 

Im mostly after the better braking. With 40in tires and towing 14k I need the better braking

 

Do you actually have 3/4 ton axles yet?

 

Have them not installed yet. Originally won't br until next year. Im testing KBS on the frame and if it works out I'll paint the axles with it. Plus gears and lockers

 

Kbs??

 

Same guy who made POR-15 broke away and made a better frame paint

 

Is it priced like it is made of unobtainium as well?