2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

No start cranks only

Old Oct 27, 2018 | 11:35 PM
  #1  
Grimace71's Avatar
Grimace71
Thread Starter
|
Registered User
Joined: Nov 2015
Posts: 14
Likes: 0
Default No start cranks only

Getting a code 1389 having problems figuring out what I need to do to find true problem and fix ....the relay seems to be fine . Getting fuel getting spark .voltage dropped while driving I thought it was the alternator so replaced it but then the code came up I just recently replaced the fuel pump but its been messed up too running out of fuel with over quarter tank left any help is appreciated thanks
 
Reply
Old Oct 28, 2018 | 08:42 AM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default

No ASD voltage at PCM.

ASD relay is in the power distribution center under the hood, right behind the battery. With ignition On, you should see power on two pins in the socket. Are you getting it?
 
Reply
Old Jan 13, 2019 | 05:57 PM
  #3  
dodgedude37's Avatar
dodgedude37
Amateur
Joined: Jul 2010
Posts: 30
Likes: 1
From: modesto ca.
Default crank but no start

this post did not go to completion. i have a 93 stealth base, it also cranks with no start & no ck engine. while standing in front of vehicle with key on i will hear a clicking noise at rear of engine. after that car will start & run fine, i have removed & cleaned IAC valve. it acts like it is still sticking.
 
Reply
Old Jan 13, 2019 | 07:16 PM
  #4  
PR1AWRet's Avatar
PR1AWRet
Veteran
Veteran: Navy
5 Year Member
Liked
Loved
Joined: Jan 2017
Posts: 475
Likes: 41
From: Imperial Beach CA
Default

dodgedude37
I had a 93 Stealth TT AWD 400hp 4 wheel steering. Go over to this site for questions and answers, lots of nice people there:
https://www.3si.org/
 

Last edited by PR1AWRet; Jan 13, 2019 at 07:18 PM.
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:06 AM.