door speaker wiring help needed.
#1
door speaker wiring help needed.
i have looked for info on this but its confusing...all the info i have found the door speaker harness have more wire the mine...the door speaker amps have been cut off and the harness plus is left... pass side door speaker harness wire color are ltblu/blk...blk/rd,,,, dk/blu,,,ltblu/rd,,,blk/pur,,,violet..... driverside is,,,,y/blk,,,blk/rd,,,bro,,,y/rd...blk.,,,green. these are factory wires from the door speaker harness there is 6 wires on each door speaker harness,,,thanks for any help,
The following users liked this post:
Caleb1119 (07-27-2023)
#2
#5
thanks i found the page...looks like two of the 6 wires goto the front speakers, and two went to the tweeters and one goes to the choke relay, and one to ground.....but from what i can tell the rear speakers come straight from the radio, can you tell if this is correct,,, if not any ideas.
Last edited by flathead31coupe; 03-13-2019 at 09:57 PM.
The following users liked this post:
Caleb1119 (07-27-2023)
#6
#7
That is correct. What you guys are calling the AMP is actually a crossover for the tweeter. Since the rears don't have tweeters you don't need the crossover
Trending Topics
#8
thanks i found the page...looks like two of the 6 wires goto the front speakers, and two went to the tweeters and one goes to the choke relay, and one to ground.....but from what i can tell the rear speakers come straight from the radio, can you tell if this is correct,,, if not any ideas.
I have the same thing going on here this is the oem harness running into the door.
Just wondering what colours you ended up matching together. This is the speaker end of the harness. And I’m installing new aftermarket speakers. Just needing to know what colour of wires you had going to the speaker and then what colours you had to join together.
Last edited by Caleb1119; 07-27-2023 at 09:09 PM.