When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
The gearshift lever feels like it could slip when i engage it. Wondering if its worn out and needs replaced?
If so, could you point me to a decent replacement part.
Thanks. J
Last edited by judgeholden; 04-15-2019 at 11:44 PM.
The gearshift lever feels like it could slip when i engage it. Wondering if its worn out and needs replaced?
If so, could you point me to a decent replacement part.
Thanks. J
If you are talking about the 4wd lever, I think there are just bushings you replace
It's not loose but seems like it could slide from eg neutral to drive. Noticed it over the winter. It engages all functions. Usually it's pull lever and engage function I noticed it can slide between functions.
Yeah, prolly just the bushings in the linkage. Crawl under, and wiggle things around. See what you see. Pretty sure the bushings are available at most any parts store.