When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I found that my PCV valve on the driver side of the engine (5.2v8) was constanly clicking and rattling so I figured it was bad. I replaced it and it continued to rattle so i replace the vacuum hose that goes from the side of the intake to the PCV since it was dry and cracked. I assumed that it was leaking vacuum and causing it to rattle but with a brand new hose and PCV is continues to rattle does anyone know anything about this.
PCV rattle is normal. Its a valve. It tries to keep a constant vacuum on the crank case, and it does that by varying the amount of vacuum applied. Thus, it rattles. Some are definitely louder than others..... But yeah, get the mopar PCV, they are actually the correct flow rate.