When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
My first post!
1998 Dodge Ram 1500 5.9l v8 4x4 Laramie
Okay so a while back I replaced my PCV valve and hose on my truck. After I had replaced it I noticed this weird whistle when I step on it. It’s been months now and after replacing the grommet the pcv valve goes into, checking for vacuum leaks, checking for exhaust leaks(flow master super 10 supposedly has some sort of exhaust baffle issue that sounds similar), I still cannot figure it out. Is it the PCV valve?
My first post!
1998 Dodge Ram 1500 5.9l v8 4x4 Laramie
Okay so a while back I replaced my PCV valve and hose on my truck. After I had replaced it I noticed this weird whistle when I step on it. It’s been months now and after replacing the grommet the pcv valve goes into, checking for vacuum leaks, checking for exhaust leaks(flow master super 10 supposedly has some sort of exhaust baffle issue that sounds similar), I still cannot figure it out. Is it the PCV valve?
If the PCV valve wasn't a Mopar, that could be the issue.