When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
First up, turn signals. I replaced the bulbs and flasher fuses inside the cabin. The blinker on my dash works, the front blinkers work, but the rear passenger light won't blink. it comes on when i have the headlights on and press the brakes. any ideas? I'm stumped here.
second: I only have one key, how can I tell if I have a key with a chip? I know this is a stupid question.
Just for you're knowledge chip keys didn't come out until 06 (1500) or 07 (2500/3500). Also I think the ground is shared for the brake light and turn signal
Just for you're knowledge chip keys didn't come out until 06 (1500) or 07 (2500/3500). Also I think the ground is shared for the brake light and turn signal
The 3rd gens all had chip keys, They were a different style keys in 06/07.
Hmmm. Interesting on the key part. Bought a truck with only one key and an immobilizer so wondered about getting an extra key for it made up. Probably have to find a way to get another immobilizer FOB but would be nice to have a spare key around.
Not to piggyback off the topic but anyone every try replacing the ignition / door lock cylinders in their vehicle? Doors on my daily(98 1500 Sport) came off a 95 ram so I have a key to open the doors and a key to start it but I could try taking the ignition out of the other spare truck... should work fine?
Hmmm. Interesting on the key part. Bought a truck with only one key and an immobilizer so wondered about getting an extra key for it made up. Probably have to find a way to get another immobilizer FOB but would be nice to have a spare key around.
Not to piggyback off the topic but anyone every try replacing the ignition / door lock cylinders in their vehicle? Doors on my daily(98 1500 Sport) came off a 95 ram so I have a key to open the doors and a key to start it but I could try taking the ignition out of the other spare truck... should work fine?
I had my door lock cylinders rekeyed. Not hard to pull them